Installing The Front Wheel - Yamaha YJ125S Service Manual

FRONT WHEEL AND BRAKE DISC
1
3
2
3
1
2
EAS00542

INSTALLING THE FRONT WHEEL

NOTE:
Make sure the speedometer gear unit and the
wheel hub are installed with the two projections
2meshed into the two slots3 respectively.
1
2
NOTE:
Make sure the slot2 in the speedometer gear
unit fits over the stopper 3on the outer tube.
cC
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.
w
Make sure the brake hose is routed properly.
4-8
1. Lubricate:
8 wheel axle
8 wheel bearings
8 oil seal lips
Recommended lubricant
Lithium-soap-based grease
2. Install:
8 speedometer gear unit 1
3. Install:
8 front wheel 1
4. Tighten:
8 wheel axle
70 Nm (7.0 m • kg, 50.6 ft • lb)
5. Install:
8 brake caliper 1
8 brake caliper bolts 2
35 Nm (3.5 m • kg, 25.3 ft • lb)
CHAS