Installing The Front Wheel (Front Brake Disc) - Yamaha 2010 XMAX YP125R Service Manual

f. Repeat steps (c) through (e) several times
until all the marks come to rest at the same
spot.
g. The spot where all the marks come to rest is
the front wheel's heavy spot "X".
L LLL L LLL L L LLL L
3. Adjust:
• Front wheel static balance
M MMM M MMM M M MMM M
a. Install a balancing weight "1" onto the rim ex-
actly opposite the heavy spot "X".
TIP
Start with the lightest weight.
b. Turn the front wheel 90° so that the heavy
spot is positioned as shown.
c. If the heavy spot does not stay in that posi-
tion, install a heavier weight.
d. Repeat steps (b) and (c) until the front wheel
is balanced.
L LLL L LLL L L LLL L
4. Check:
• Front wheel static balance
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
L LLL L L LLL L L LLL L
M MMM M MMM M
a. Turn the front wheel and make sure it stays at
each position shown.
b. If the front wheel does not remain stationary
at all of the positions, rebalance it.
L LLL L LLL L
LLL
EAS21990
INSTALLING THE FRONT WHEEL (FRONT
BRAKE DISC)
MMM
1. Install:
• Front brake disc
TIP
• Install the brake disc so that the recessed por-
tion of the bolt hole faces away from the hub.
• Tighten the brake disc bolts in stages and in a
crisscross pattern.
LLL
4-13
FRONT WHEEL
M MMM M M MMM M M MMM M
L LLL L L LLL L L LLL L
Front brake disc bolt
12 Nm (1.2 m·kgf, 8.7 ft·lbf)
LOCTITE®
M MMM M MMM
L LLL L LLL