8
Input logout, and then press Enter.
.
Brocade 10 Gb/sec DCB switch module initial configuration
Change the system administrator password.
Login
1
Start a terminal emulator to the switch module from the system console,
.
and then connect IP address that is configured as
configuration on page
2
Input <user ID> and <password> in the following Table to login.
.
User ID
Password
2-14.
Table 2-7 Factory default setting for the system administrator
Item
admin
password
Initial setup
Hitachi Compute Blade 500 Series Getting Started Guide
Management LAN port
Factory default setting
2-31