Switch Module - Hitachi Compute Blade 500 Series Web Console Users Manual

Item
Status
LID
Type
Item
LID ON
LID OFF
Power ON
Power OFF Powers off the selected switch module. You can select multiple switch

Switch module

Switch module window provides a selected switch module operation status,
hardware information. You can perform its operations, including basic settings
for Hitachi 1 Gb LAN switch module (20 ports and 40 ports), Hitachi 1/10 Gb
LAN switch module, and starting Brocade 8 Gb fibre channel switch module
and Brocade 16 Gb/sec fibre channel switch module Web console.
Shows an operation state of the switch module among the following states.
Normal: In normal state.
Booting: In initialization state.
Warning: In warning state. See the event log list to check details.
Fault: In failed condition. See the event log list to check details.
-----: No switch module is installed.
Shows an LID (Identification LED) state among the following states.
ON: Powered on.
OFF: Powered off.
-----: No switch module is installed.
Shows the switch module name.
Table 2-138 Action buttons at the bottom
Turns on LID (Identification LED) of a selected switch module. You can select
multiple switch modules to turn on those LIDs.
Turns off LID (Identification LED) of a selected switch module. You can select
multiple switch modules to turn off those LIDs.
Powers on the selected switch module. You can select multiple switch
modules to power on those switch modules.
modules to power off those switch modules.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description
2-123