Hitachi Compute Blade 500 Series Web Console Users Manual page 216

FTP tab
Service status
IPv4 Access control
Connectable
network
IPv6 Access control
Connectable
network
Item
Edit
2-206
Item
IP address If access control is set to Allowed (With restrictions),
Net mask
IP address If access control is set to Allowed (With restrictions),
Net mask
Table 2-256 Action button at the bottom
Edits FTP service settings.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Table 2-255 FTP items
Shows Enable or Disable connection to the
management module via FTP.
Displays IPv4 access control settings for connections
to the management module via FTP. The following
settings are available: Allowed (No restrictions),
Allowed (With restrictions), and Prohibited.
this item displays information (network address and
subnet mask) about the network from which
connections are allowed.
Displays IPv6 access control settings for connections
to the management module via FTP. The following
settings are available: Allowed (No restrictions),
Allowed (With restrictions), and Prohibited.
this item displays information (network address and
prefix length) about the network from which
connections are allowed.
Description
Description