Hitachi Compute Blade 500 Series Web Console Users Manual page 52

Power
Smart
Configure
LP
2-42
Table 2-40 Settings tab items
Item
AC recovery
Recovery wait
time
Power On
suppression
Status
N+M cold
standby
WWN type
MAC type
Logical
Partitioning
LP version
LP Model
Upper bound of
version
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Power ON:
Powers on the server blade when the power is supplied to
the server chassis.
Power OFF:
Remains the server blade in power-off when the power is
supplied to the server chassis.
Last state:
Returns the state of the server blade to that in the last
time when the server chassis is powered off.
When the operation after power recovery is Power ON or
Last state, the wait time for the server blade to be
powered on from 0 up to 60 minutes.
Restricted: Power ON to the server blade is restricted.
This temporarily occurs in server blades, active and
standby, when N+M cold standby switches server blades.
Power ON available: Power-on restriction is disabled.
Smart Configure is in operation. Shows one of the
following:
No Information; In Progress; Not Configured; Configured
Enables and Disables N+M cold standby: Enabled/
Disabled.
With Enabled, N+M cold standby is built, and Smart
Configure is automatically performed once. Smart
Configure is also automatically performed when the server
chassis is powered on or a server blade is inserted.
Select WWN for the fibre channel adapter on the server
blade to use: default physical or optional physical. With N
+M cold standby enabled, WWN type is fixed to Optional
Physical WWN.
Select MAC address for the LAN adapter on the server
blade to use: default physical or optional physical,
regardless of N+M cold standby settings.
Shows whether or not to operate LPAR manager on the
server blade.
Enabled: Performs LPAR manager. Setting details are
shown in the LPAR tab on page
Disabled: Normal OS starts without performing LPAR
manager.
Shows the LPAR manager firmware version assigned to
the server blade in LP mode. For Basic-mode server
blades, "--------" is shown.
Shows an LPAR manager model.
Shows the latest version of LPAR manager firmware
available.
2-87.