Hitachi Compute Blade 500 Series Web Console Users Manual page 36

Item
Status
Maintenance
mode
Remaining time
[min]
Logical
Partitioning
Item
Smart
Configure
Start Remote
Console
LID ON
LID OFF
Power ON
Power OFF
2-26
ON: The LID (Identification LED) turns on.
OFF: the LID (Identification LED) turns off.
-----: No server bladed is installed.
Shows an operation state of the server blade among the following
states.
Normal: In normal state.
Warning: In warning state. See the event log list to check details.
Failed: In failed condition. See the event log list to check details.
-----: No server bladed is installed.
Shows the server blade mode.
ON: Set in maintenance mode.
OFF: Not set in maintenance mode.
When a server blade is in maintenance mode, the remaining time for
the mode is shown in minutes.
Shows an OS operation mode.
Disabled: OS in Basic mode, not in LP mode, starts.
Enabled: OS in LP mode starts.
-----: No server bladed is installed or a non-primary server blade is
installed.
Table 2-23 Action buttons at the bottom
Performs Smart Configure to the selected server blade. You can specify
multiple server blades for Smart Configure.
Starts the remote console of the selected server blade. The remote
console appears on another window. You can select multiple server
blades for this item.
Turns on the LID (Identification LED) of the selected server blade. You
can select multiple server blades to turn on their LIDs.
Turns off the LID (Identification LED) of the selected server blade. You
can select multiple server blades to turn off their LIDs.
Powers on the selected server blade. You can select multiple server
blades to power on.
Shuts down the selected server blade to be powered off. You can select
multiple server blades to shut down. Some running OSs may not be
powered off due to the OS settings. Check the OS settings before using
this item.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description