Hitachi Compute Blade 500 Series Web Console Users Manual page 117

Table 2-116 Items in Modify LPAR
Item
Name
1
LPAR
Processor spin box
Shared radio button
Dedicated radio button
Memory spin box
2
HBA panel
3
NIC panel
4
USB panel
Advanced Option
Note:
1 Shows the LPAR resource status.
.
2 Shows assigned HBAs.
.
3 Shows assigned NICs.
.
4 [Management module firmware version A0205 or later]
.
Shows assigned USBs.
5 [Management module firmware version A0205 or later]
.
Shows items other than those above.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Changes the LPAR name in the text box.
Changes the number of processors to
assign to the LPAR.
Assigns processors in shared mode.
Assigns processors in dedicated mode.
Changes memory size in units of 0.25
GB.
Set Port button Shows the Set HBA port dialog box.
Set Port button Shows the Set NIC port dialog box.
Set Port button Shows the Set USB port dialog box.
5 Boot Mode [Management module firmware version
A0205 or later]
pull-down list
Shows a boot mode for the LPAR.
Description
2-107