Hitachi Compute Blade 500 Series Web Console Users Manual page 34

Item
Unmount Unmounts a selected USB device.
Server blade list view
Selecting Server Blades from the navigation tree on the left allows you to
view the status of all server blades installed and operate them. You can also
perform basic operations including power operation to all or some specified
server blades.
Server Blade Summary
Item
Maintenance
mode ON
2-24
Table 2-20 Action button at the bottom
Make sure to unmount a USB device before removing it. If you remove a USB
device without unmounting it, the USB device may be broken.
Cannot unmount an LCD touch console. Log out of the LCD touch console
before removing it.
Table 2-21 Action combo box items on the upper right
Selects a server blade slot and sets it in maintenance mode.
Maintenance mode is set in relation to a server blade slot. If the slot
has a server blade, the server blade is also set in maintenance mode.
The mode will be automatically cancelled in about two hours after the
mode is set.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description