Hitachi Compute Blade 500 Series Web Console Users Manual page 175

Item
Maximum power
consumption
Minimum power
consumption
Accurate power
control value (APC)
Emergency power
control (EPC)
Accurate power
control (APC)
Server blade power
OFF sequence
Present CPU
frequency
Average CPU
frequency
Maximum CPU
frequency
Table 2-192 Action button at the bottom
Item
Edit power capping Sets the power capping (APC/EPC) to the selected server blade.
If DCMI mode is enabled, only EPC can be set.
Note: Do not disable Emergency power control (EPC).
Hitachi Compute Blade 500 Series Web Console User's Guide
Shows the maximum value of power consumption for the last 3
minutes.
Shows the minimum value of power consumption for the last 3
minutes.
APC (accurate power control)
Nothing is shown if DCMI mode enabled.
Shows whether or not it is the target for EPC (emergency power
control) power capping. A value in parentheses, a value for a non-
primary server blade, cannot be used for operation even though it
can be changed. Non-primary server blades operate with the
primary server blade settings.
Shows whether or not it is the target for APC power capping. A
value in parentheses, a value for a non-primary server blade,
cannot be used for operation even though it can be changed.
Non-primary server blades operate with the primary server blade
settings.
Nothing is shown if DCMI mode enabled.
Shows the order of server blades to be powered off when the
power exceeds the capacity. A value in parentheses, a value for a
non-primary server blade, cannot be used for operation even
though it can be changed. Non-primary server blades operate
with the primary server blade settings.
Shows the current CPU frequency.
Shows the average value of CPU frequencies for the last 3
minutes.
Shows the maximum value of CPU frequencies for the last 3
minutes.
Operating the Web Console
Description
Description
2-165