Set Rds Clock; Play Audio Files; Play A Disc - Philips cem5100 User Manual

• [TA OFF]: Traffic announcement does
not cut in.
Note
•
If the current received TA signal remains weak for
over 120 seconds, the unit will activate TA Seek mode
automatically. The TA Seek will seek for other station
with good condition of TA signal.
Tip
•
When a traffic announcement cuts in, user can short
press to terminate the traffic announcement, and the
unit will resume to previous playback mode.

Set RDS clock

You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1
Press and hold MENU.
2
repeatedly until [CT] is
Press or
displayed.
3
Rotate to select a setting:
• [CT ON]: turn the RDS clock on.
Time shown on the unit synchronizes
with that on the RDS station.
[CT OFF]: turn the RDS clock off.
•
Tip
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
EN
18

7 Play audio files

Note
•
Ensure that the disc or device contains playable files.

Play a disc

Note
•
You cannot play CDs encoded with copyright
protection technologies.
You can play commercially available audio CDs
and these discs:
• CD-Recordables (CD-R)
• CD-Re-writables (CD-RW)
• MP3 CDs
• WMA CDs
Note
•
Ensure that the disc contains playable content.
Insert a CD with the printed side facing up.
» Play starts automatically.
• To pause CD play, press
• To resume CD play, press
• To skip to the previous/next track, press
or .
• To search backward/forward rapidly within
the current track, press
seconds.
Remove the CD
To take out the CD, press on the front panel.
.
again.
or for 3