Set Rds Clock; Play A Disc - Philips CEM3100 User Manual

Note
If the current received TA signal remains weak for
automatically. The TA Seek will seek for other station
with good condition of TA signal.
Tip
press
unit will resume to previous playback mode.

Set RDS clock

You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1
Press MENU.
2
Press or repeatedly until [CT] is
displayed.
3
Rotate to select a setting:
[CT ON]: Turn on the RDS clock.
Time shown on the unit synchronizes
with that on the RDS station.
[CT OFF]: Turn off the RDS clock.
Tip
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
16 EN
6 Play audio files
Note

Play a disc

Note
You cannot play CDs encoded with copyright
protection technologies.
You can play commercially available audio CDs
and these discs:
CD-Recordables (CD-R)
CD-Re-writables (CD-RW)
MP3 CDs
WMA CDs
Note
Ensure that the disc contains playable content.
Insert a CD with the printed side facing up.
» Play starts automatically.
or .
To search backward/forward rapidly within
seconds.
Remove the CD
Tip
hold until the disc comes out.
.
again.
or for 3
on the front panel.