Install Remote Control Battery; Turn On; Select Country/Region - Philips CEM3100 User Manual

7
Reconnect the negative terminal of the car
battery.
Attach the front panel
1
Attach the trim plate.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Press the left side of the panel until the
mechanism locks it into place.

Install remote control battery

Caution
Risk of decreased battery life! Never mix different
brands or types of batteries.
Risk of product damage! When the remote control is
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
12 EN
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.

Turn on

Press .
press and hold
off.

Select country/region

Note
the unit can not work properly.
1
Press to turn on the unit.
» [SELECT OPERATING REGION] is
displayed.
until the unit is turned