Microwave Oven/Single Electric Wall Oven
Combination Installation
For detailed product dimensions
and installation specifications,
refer to model-specific product
sheet and installation instructions
on the web
E30MO65GSS
Microwave Oven
Cutout
E30EW75GPS
E30EW75GSS
Single Electric
Wall Oven Cutout
* Minimum 3
clearance required
from bottom of
Built-In Microwave
Oven cutout to top
edge of Wall Oven's
faceplate, leaving
a 2" visible area
between both product
faceplates
** Critical dimension –
MUST be applied
Microwave Oven / Single Electric Wall Oven
Combination Installation Specifications
Always consult local and /or national electric codes.
•
(Refer to product-specific electrical specifications on this page.)
Minimum 24"deep cutout dimension is critical for proper combination
•
installation, to ensure that each built-in product's faceplate will fit
flush against cabinet front.
Bases must be level and cabinet front must be square.
•
Minimum 4-1/2" required distance from bottom of Wall Oven cutout
•
to floor, 31" suggested.
Respect critical dimensions as noted for proper installation of built-In
•
products.
Minimum 23-1/4" clearance needed for Wall Oven door depth
•
when open.
250 Bobby Jones Expressway
USA
•
•
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
•
•
MO_EW INST 08/07
19
7
/
"min.
8
20
3
/
"max.
8
3
1
/
" min.*
8
28
1
/
"min.
2
7
28
/
"max.
8
1
/
"
31"
8
suggested
distance
4
1
/
"
2
min.
required
Augusta, GA 30907
1-877 -4electrolux (1-877 -435-3287)
•
1-800-265-8352
•
24" min.
30" min.
5"
1
11
/
"
2
26
1
/
"min.
2
27"max.
24" min.**
1
28
/
"min.
(critical
2
29"max.
dimension)
2" min.
Bottom cutout
edge must be
finish cut
30" Built-In Convection Microwave Specifications
Product Weight – 60 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.55 kW
•
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
Amps @ 120 Volts = 13 Amps
•
Full base of solid plywood or similar material required, capable of
•
supporting 100 Lbs.
Minimum 3-1/8" clearance required from bottom of Built-In Microwave
•
cutout to top edge of Wall Oven's faceplate, leaving a 2" visible area
between both product faceplates.
30" Electric Single Wall Ovens Specifications
Product Weights – (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
•
AC only electrical supply with ground required on separate circuit fused
on both sides of line.
Connected Load (kW Rating) @ 240 / 208 Volts = 4.0 / 3.0 kW
•
Amps @ 240 / 208 Volts = 16.6 / 14.4 Amps
•
Full oven base of solid plywood or similar material required, capable of
•
supporting 200 Lbs.
Note: Refer to Product Installation Guide for detailed instructions
on the web at electroluxusa.com.
electroluxusa.com
•
electroluxca.com
•
© 2007 Electrolux Major Appliances, NA
120V/60Hz
grounded electrical
outlet should NOT
be located within
shaded area
Full plywood base
required to support
100 lbs.
4"x 4" opening
to route armoured
cable
Full base required
to support 200 lbs.
3" max.
Electrical junction
box location
High standards of quality at Electrolux Major Appliances mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Printed in the U.S.A.