Using The Clipper - Panasonic ER-GS60 Operating Instructions Manual

3. Slide the trimming height adjustment
lever to the left or right and adjust the
trimming height indication mark to the
number indicating the desired length.
3 mm
adjustment
Trimming scale and the
length 3 mm
(estimate) adjustment
indicator
positions
2 mm
3 mm
4 mm
5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
• To trim to 1 mm length, use the 1 mm comb attachment.
• It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
• Actual hair length will be a little longer than the height you set.
The trimming height adjustment
lever and the trimming height
indicator positions
2 mm 3 mm 4 mm
5 mm 6 mm 7 mm
8 mm 9 mm 10 mm
Using the clipper
• Make sure there is no damage to the blade.
• We recommend using the clipper in an ambient temperature
range of 0 – 35 °C. If used outside this range, the appliance may
stop operating.
Trimming the entire area in wet
• Trim in dry when trimming without the comb attachment.
• Wet trimming is recommended when trimming to approximately
5 mm or shorter lengths.
• When trimming in wet, you may not get desired results
depending on the length of the hair before trimming (should be
approximately 10 mm or longer) and/or hair condition (permed
hair, etc.).
For such cases, it is recommended to trim in dry.
1
1
Lather hair with a shampoo.
• Do not use any hair washing agent other than shampoo.
2
2
Softly remove the foam with your hands.
• Hair trimmings can easily accumulate on the comb
attachment when there is too much foam.
3
3
Attach the desired comb attachment to the
main body.
11