Picture Tab - Sony SNC-EP520 User Manual

Focus mode
Select the focus mode.
Auto: The focus is automatically adjusted.
Manual: The focus can be adjusted by using the
and
displayed in the main viewer.
Audio codec
Select whether you are going to send audio from the m
microphone input connector. Select On to send the
audio from the network camera.
Notes
• When you change the Audio codec setting, click
Refresh on the Web browser to reflect the change on
the opening main viewer page.
• When you change the Audio codec setting, images
from Video out may become momentarily unclear.
Mic volume
Set the volume level of the audio input from the m
microphone input connector. It is adjustable from –10 to
+10.
Codec
Select the bit rate of audio from the m microphone input
connector. G.711 (64kbps), G.726 (40kbps), G.726
(32kbps), G.726 (24kbps) or G.726 (16kbps) can be
selected.
Note
No audio is output if JPEG or JPEG/Flash is used for the
Plug-in free viewer.
Dynamic range compressor
Select On to use dynamic range compressor.
Audio upload
Using SNC audio upload tool stored in the supplied
CD-ROM, you can output audio that is input to the
computer's audio input terminal from a powered
speaker connected to the line output jack of the camera.
Select On to output audio from the speaker.
Volume
Set the speaker volume level from – 10 to + 10.
OK/Cancel
See "Buttons common to every menu" on page 26.
36
Setting the Camera Image and Audio — Camera Menu
,
buttons of the control panel

Picture Tab

You can set the color condition, exposure, etc., of the
camera.
Display sample: SNC-EP520
Preview screen
This screen is for monitoring images and configuring
image settings.
For the details of each button, please refer to the Control
bar of the Plug-in free viewer (page 17).
Exposure
Select the exposure mode of the camera.
The setting items required for the selected mode become
active.
Full auto: The camera performs the gain and iris
adjustment automatically. In this case, the shutter
speed is fixed. (1/60 sec. for NTSC or 1/50 sec. for
PAL).
When this option is selected, Slow shutter and
Backlight compensation become active.
Shutter priority: The camera performs the gain
adjustment and iris adjustment automatically and
you can select the shutter speed. When this option is
selected, Shutter speed becomes active.