Setting The Edge Storage - Edge Storage Menu - Sony SNC-EP520 User Manual

Setting the Edge Storage
— Edge Storage Menu
When you click Edge Storage
menu, the Edge Storage menu appears.
With Edge Storage, video or audio signal can be
recorded from the alarm detection results, such as
network block, recorded video and audio can be
streamed with the same protocol as the real-time
streaming.
Notes
• The frame rate and operability on the main viewer
may be reduced during image storage.
• Stop the Edge Storage recording when you turn off the
power of the camera with a SD memory card inserted.
• Before using a SD memory card, format it using the
computer, or by Format SD memory card in the
Initialize tab of the System menu (page 33).
• The supplied ActiveX viewer is not used for streaming
the recorded video or audio data. For details on
supported applications, contact an authorized Sony
dealer.
• Before removing or inserting a card, turn the power of
the camera off.
• A maximum of 500 video entries can be saved to an
SD memory card. If Overwrite is set to Off when the
number of entries reaches 500, new recordings will
cease to be made. If Overwrite is set to On when the
in the Administrator
number of entries reaches 500, the unit will begin to
overwrite old entries in ascending chronological
order.
Edge Storage
Select On to use Edge Storage.
Alarm buffer is not available when On is selected.
SD memory card
Display the available free space of external SD memory.
Note
The video or audio data of Edge Storage cannot be
recorded in the built-in memory.
Overwrite
Select On to overwrite the file when there is insufficient
memory space to record the image in the SD memory.
On: Overwrite is enabled and old files will be
overwritten in the order of date.
Off: Overwrite is prohibited. No recording will be
performed.
Recording status
Display the current recording status.
The recording status will not be updated until the screen
is refreshed.
Use the Start and Stop button to start or stop the
recording manually.
Video recording
Select the video codec mode you want to record.
For detailed settings of video codec mode, see the Video
codec tab in the camera menu.
Audio recording
Set whether to record the audio signals input from the
camera.
Select On to record.
Note
Audio recording is not available when the Audio codec
(page 36) is set to Off in the Camera Menu-Common
Tab.
Recording capacity
Displays the maximum recording time of the alarm
buffer in the current camera setting of the video mode,
image size, bit rate and frame rate.
Setting the Edge Storage — Edge Storage Menu
75