Device Configuration; System Presets - Sharp ER-A770 Dealer Knowledge Book

SRV MODE PROGRAMMING
1. Device Configuration - CAT#2:
Place the ER-A770 into SRV mode:
1) Select 2 SETTING
2) Select 1 DEVICE ASSIGN
3) Select 15 CAT#2
4) Set the Channel No. followed by depressing the [ENTER] key.
Note: the RS-232 port which the Debitek Card Reader is physically connected (Refer to pg. 2).
*** for this example CH#1 is used.
5) Depress [CANCEL] to exit to the SRV SETTING Sub-Menu.
6) Depress [CANCEL] again to exit to the SRV MODE Sub-Menu.
7) Depress [MODE] to exit to the REG MODE.
1
2. SRV Mode System Presets:
Place the ER-A770 into SRV mode;
1) Select 2 SETTING
2) Select 2 SYSTEM PRESET
3) Set the following values;
a) Job#906:
b) Job#916:
1
Designs and specifications are subject to change without notice.
2
= 0xxx
= x4xx
2
Pr Pr Pro o o o o g g g g g r r r r r amming Pr Pr
3
3
amming amming amming amming
4
4
Page / 9