Hp P6000 Command View Implementation - HP 4400 Enterprise Installation Manual

Virtual array

Table of Contents

Table 1 Raid Level Comparison (continued)

Summary

of one. Vraid6 uses 33% more

physical disk space than

Vraid0.

NOTE:

For best practice information, see the HP 4400 Enterprise Virtual Array configuration

best practices white paper available at:

http://h18006.www1.hp.com/storage/arraywhitepapers.html?jumpid=reg_R1002_USEN

HP P6000 Command View implementation

HP P6000 Command View can be implemented in two ways:

Server-based management—HP P6000 Command View is installed on a management server

connected to the EVA, providing management of multiple HP EVA storage systems. All

components of the software suite (HP P6000 Command View, HP Command View EVAPerf,

HP Storage System Scripting Utility, SMI-S EVA) are installed. Server-based management is

applicable to all EVA models.

Array-based management—Beginning with HP Command View EVA 8.1, the EVA4400 is

shipped with HP P6000 Command View pre-installed on the management module within the

controller enclosure. Only one component of the software suite (HP P6000 Command View)

is installed. Array-based management is applicable to the EVA4400 only.

Best practices

level of redundancy protection of all

the Vraid types.

HP P6000 Command View implementation

Data redundancy

RAID method

Table of Contents