Tilt Lock Mechanism; Tilt Support Lever For Manual Tilt Model; Top Cowling Lock Lever(S) (Turn Type) - Yamaha 30DMH Owner's Manual

Components
partially to provide more clearance when op-
erating in shallow water.
EMU30530

Tilt lock mechanism

The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the wa-
ter when in reverse gear.
1
1. Tilt lock lever
To lock it, set the tilt lock lever in the lock po-
sition. To release, push the tilt lock lever in
the release position.
EMU26351
Tilt support lever for manual tilt
model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
swivel bracket.
17
ECM00660
ZMU03763
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
EMU26372

Top cowling lock lever(s) (turn type)

To remove the engine top cowling, turn the
lock lever(s) and lift off the cowling. When in-
stalling the cowling, check to be sure it fits
properly in the rubber seal. Then lock the
cowling again by returning the lever(s) to the
ZMU03764
lock position.
1. Top cowling lock lever(s)
1
ZMU03766
ZMU03701