Table of Contents
Advertisement
Available languages
Available languages
s
4
Installation
The reader is designed to be surface mounted.
NOTES:
•
If the reader should be mounted directlyonto condictive materials, such as metal
surfaces, metal frames (reinforcement) or metal-plated surfaces, this will reduce,
more or less, the readers read range.
•
The distance between readers of the same design should not be less than 30 cm.
•
Before final installation, the planned installation site should be checked for
suitability.
•
You can tell the direction of the bottom section of the housing from the inscription
!
"TOP
". The arrow must point upwards!
!
TOP
Figure 1: Installation direction
8
36
Page
from
Operating instructions card reader AR6331-CP / AR6332-CP
Order no.: A24205-A335-H050
Advertisement
Chapters
Table of Contents
