NEC IntelliBase A3844 User Manual page 11

NEC204 Eng.Fr.manual 10/26/98 10:20 AM
Step 6 Locate the two
screws that
are supplied
with the
IntelliBase
™
and attach
the IntelliBase
to the adapter
plate and
monitor as
shown in
Figure 3E.
Proceed to Page 10 to connect your MultiSync
USB Hub to your system.
MultiSync Monitor Model Names
MultiSync XE21, XP21, E1100, E1100+, P1150 and P1250+
Step 1 With the monitor
unplugged from your
system and wall outlet,
carefully turn the
monitor upside down
onto a firm table so
that the base is
facing up as shown
in Figure 1.
Page 11
ROTATE ADAPTER
PLATE UNTIL IT
ALIGNS WITH
THROUGH HOLES
ON THE BASE
® monitor with IntelliBase
MONITOR IN POSITION TO
REMOVE THE BASE AND ATTACH
INTELLIBASE USB HUB
Figure 1
7
Figure 3E
INTELLIBASE
(BOTTOM VIEW)
BASE