NEC AccuSync LCD22WMGX, AccuSync LCD24WMCX User Manual page 16

Controls
Picture
Boost
OSD Setup
Extra
–continued
Frame Size
Adjust the size of the Frame.
(When Bright
Frame is on)
Brightness
(When Bright
Brightness Adjustment for Enhance Area
Frame is on)
Contrast
(When Bright Contrast Adjustment for Enhance Area
Frame is on)
Hue
(When
Hue Adjustment for Enhance Area
Bright Frame
is on)
Saturation
(When Bright
Saturation Adjustment for Enhance Area
Frame is on)
Position
Adjust the horisontal position of the Frame
(When Bright
Adjust the vertical position of the Frame
Frame is on)
Enhance Area function
Bright Frame
Note: Bright Frame and Frame size settings are
not stored.
Adjust the horizontal position of the OSD.
H. Position
Adjust the vertical position of the OSD.
V. Position
Timeout Adjust the OSD timeout.
Set OSD display language.
Language
(English is default setting)
Select input source YPbPr and HDMI for MFM.
Input Select
Auto Adjust the H/V Position, Focus and Clock
Auto Adjust
of picture.
Turns on or off the two-way communication
between the graphics card and the monitor.
With DDC/CI turned on, some monitor settings
DDC/CI
can be adjusted through the graphics card
using a computer.
Reset OSD settings.
Reset
Aspect
Set aspect ratio.
Show the resolution, H/V Frequency, Serial
Information
No. and input port of current input signal.
14