Before Use; When Using The Appliance For The First Time; How To Use - Panasonic ES-WH80 Operating Instructions Manual

Before use

• Do not use the appliance in dark places.
Doing so may cause temporary irritation in the eyes.
• Please remove any unwanted hair first from the treatment area.
• Before use, wipe away any water or sweat from the treatment
area, and any hair sticking to the skin.
Otherwise, the dirt on the guard or flash window cannot be
removed.

When using the appliance for the first time

Check that the output level suits your skin.
Set the output level to 1 (LV1) and flash the treatment area
once.
After 2 days If there are no skin abnormalities
Set the output level to 1 (LV1) and start treatment on the
area that you want.
• Guide for treatment frequency, time (See page 10.)
If there are no skin abnormalities
After 2 weeks*
*For armpits and bikini line: after 1 week
To increase the output level for treatment, flash once on
the treatment area, and check your skin condition for
around 2 days before treatment. Increase the output level
one step at a time.
12
• If there is intense pain or
redness after 2 or more
days, stop using the
appliance and consult a
dermatologist.

How to use

• The power will not turn on even when pressing the switch with
the AC adaptor connected to the main body.
• Recommended ambient temperature for operation is 5 – 35 °C.
The appliance might not be usable outside of the recommended
temperature.
1
1
Remove the cap.
2
2
Press and hold (for approximately 3 seconds)
to turn the power on.
• The power will turn off automatically if the appliance is not
used for approximately 1 minute.
3
3
Press to select the output level.
SELECT
• Level 1 is selected when the power is turned on.
• The level cycles through 1
time the level selector switch is pressed.
• The level indication lamp blinks, and then turns on. (A beep
sounds, indicating that preparation for flash is complete.)
<Output levels>
Greater treatment effects
LV5
LV4
LV3
LV2
LV1
Minimal pain or irritation
2 3 4 5 1...each