Panasonic ES-WH80 Operating Instructions Manual page 17

3. Attach a new lamp cartridge.
1 Insert it straight in the direction of the
arrow.
• Insert it firmly all the way in.
2 Attach the frame.
Insert until it clicks.
4. Press and hold (for approximately 3 seconds)
appliance beeps to reset it.
• Replacement is complete if the cartridge confirmation lamp
(red) blinks twice and the alarm beeps.
• The power will not turn on unless the reset is completed.
Notes
• Always reset the appliance immediately after replacing the lamp
cartridge. (The appliance cannot be reset if too much time has
passed since replacing the lamp cartridge.)
• If the reset operation cannot be completed, recharge the appliance,
reattach the lamp cartridge again and reset the appliance.
►Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement lamp cartridge
Q&A
What type of light is
emitted from the flash
window?
Why can the appliance
be used only by those
over the age of 18?
Can the appliance be
used in areas other than
underarms, arms, legs or
SELECT until the
bikini-line?
Is it alright to use the
appliance everyday?
Why is there a burning
smell after a flash?
WES2W13
The light feels very bright
while using the appliance
but is this a problem?
Question
Instantaneous flash from a xenon
lamp.
This is because of unstable
hormone balance when growing
up and the skin can become
sensitive easily.
Only use the appliance on
underarms, arms, legs or bikini-
line. (Do not use the appliance on
the face or other areas.)
Using the appliance on the same
area everyday is not
recommended.
Please follow the guide for
treatment frequency and time.
(See page 10.)
This is because the flash applies
heat to unwanted hair, and is not
a sign of a malfunction. Remove
any hair if it has grown too long.
Also remove all trimmings
remaining on the skin.
Apply the flash switch closely
against the skin. (See page 13.)
If the light is still a concern, wear
sunglasses or other eye protection.
Answer
17