Related Manuals for NEC Express 320Fd Systems
Summary of Contents for NEC Express 320Fd Systems
- Page 1 Read Me First: Unpacking Express5800/320Fd Systems NEC Corporation of America 456-01742-000...
- Page 2 Software described in NEC (a) is the property of NEC and/or its licensees, (b) is furnished only under license, and (c) may be copied or used only as expressly permitted under the terms of the license.
-
Page 3: Table Of Contents
Introduction Before Unpacking the System Unpacking the System Disposing of Packing Materials What to Do Next Contents -iii-... - Page 4 -iv-...
-
Page 5: Introduction
Introduction Read Me First: Unpacking Express5800/320Fd Systems explains how to unpack a system from its shipping box. W A R N I N G To avoid eye and skin injuries, be careful when cutting the shipping straps from the shipping box. The straps can snap with considerable force when cut. - Page 6 Figure 1 shows the packaged components, and the order in which to remove them, for a rack-mounted system. packaged components, and the order in which to remove them, for a pedestal system. Figure 1. Unpacking a Rack-Mounted System 4 and 5 Accessories box Shipping box Shelf unit...
- Page 7 Figure 2. Unpacking a Pedestal System 4 and 5 Pedestal case Accessories box Shipping box CPU-I/O enclosures asys073...
-
Page 8: Before Unpacking The System
Before Unpacking the System • Check the label or the packing slip on the outside of the shipping box to verify that you received the correct shipment. Depending on your order, you have received either a rack-mountable system or a pedestal system. •... - Page 9 3. Open the top cardboard flaps of the shipping box by cutting through the taped portion of the flaps to release them. 4. If you have received a pedestal system, remove the pedestal case, place it on a table or other sturdy surface, and remove its foam packaging material.
-
Page 10: Disposing Of Packing Materials
8. Remove each CPU-I/O enclosure, one at a time, from the shipping pallet. Pull the foam blocks away from the first enclosure and remove it. Then, do the same for the second enclosure. W A R N I N G To avoid back injury, lift and remove each enclosure with the assistance of another person.