Starting Up Recovery Console - NEC EXPRESS5800 N8800-096F User Manual

If you have a computer that runs Windows Server 2003 or Windows 2000/XP/NT.
You can also create a "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" by the steps
below:
1.
Prepare a 3.5-inch floppy disk.
2. Insert the NEC EXPRESSBUILDER CD-ROM into the drive of a computer that runs Windows
Server 2003 or Windows 2000/XP/NT.
3.
From [Setup], select [Make OEM-Disk].
4.
Follow the instructions on the screen to insert the floppy disk.
"Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" will be created on the floppy
disk. Write-protect and place a label on the disk and keep it in a safe place.

Starting up Recovery Console

You can start up Recovery Console in two ways:
Start up Recovery Console installed on the system.
Start up Recovery Console from the Windows Server 2003 CD-ROM.
Installing Recovery Console on the system
1. Start up the NEC Express5800/ft series and log on to Windows Server 2003.
2. Insert the Windows Server 2003 CD-ROM into the drive.
3. From [Start] of the taskbar, select [Run...] to run.
CD-ROM drive:\i386\winnt32.exe /cmdcons /syspart:c: /tempdrive:c:
4. Follow the messages that appear on the screen to continue.
Starting up the Recovery Console
1. Disable the configuration for boot monitoring function.
Select [Server] - [Monitoring Configuration] - [Boot Monitoring] and choose "Disabled."
See "Step 3: Disable Boot Monitoring Function" (page 4-9) for details.
2. Power on the system.
<When starting up Recovery Console installed on the system>
(a) Select Microsoft Windows Recovery Console in "Please select the operating system to
start:"
Please select the operating system to start:
Windows Server 2003, Enterprise
Microsoft Windows Recovery Console
Troubleshooting 6-5