NEC EXPRESS5800 N8800-096F User Manual page 70

4-18 Windows Setup
[In case of using an existing parameter]
List of the parameter files on the floppy disk that has been inserted is displayed.
(1) Select the parameter file that is used for the
installation, and select [Use].
The confirmation dialog box will be displayed.
(2) If you want to confirm the parameter, select
[Review]. If you do not need to confirm the
parameter and want to proceed the installation,
select [Skip].
Select [Review].
Select [Skip].
[In case of setting an empty floppy disk]
(1) Press the A key.
The input box will be displayed.
(2) Enter the file name.
9. Select the operating system to install.
Select [Windows] from the list box.
10. The confirmation dialog box will be displayed. If you
want to confirm the parameter, select [Modify]. If you
do not need to confirm the parameter and want to
proceed the installation, select [Skip].
Select [Modify].
Select [Skip].
Go to Step 9.
After Step 9, go to Step 15.
Go to Step 11
Go to Step 15
Setup information can be modified.
Are you sure you want to modify
the information?
Skip
Modify