Installing And Using A Headset; To Install An Optional Headset; To Set Up A Headset Feature Key; To Turn The Headset Mode On And Off - NEC 10930 95 User Manual

Installing And Using a Headset

To install an optional headset:

1. Plug the headset cord into the headset jack on the bot-
tom of the telephone.
2. The headset cord routes through the upper channel on
the right side of the telephone base.

To set up a headset Feature Key:

1. Dial
#KP (#57
2. Press the Feature Key you want to assign +
3. Press
INTERCOM
–
INTERCOM
4. Press a
VOLUME
5. Press
HOLD

To turn the headset mode on and off:

1. Press your Headset Feature Key.
– The headset key is on while in the headset mode; off while in the normal handset mode.
– You can optionally dial
To use your headset:
1. While in the headset mode, you can do the following:
– Press a line key to place or answer an outside call.
– Press
INTERCOM
– While on a call, press
2. Keeping the above three things in mind, process calls normally using the convenience of a headset.
12
).
.
flashes (red).
key until you see
HEADSET
+ twice to exit.
SPEAKER
to turn the headset mode on and off.
#HS
to dial a co-worker on the Intercom.
to hang up.
SPEAKER
.
HOLD
.