Additional User Programmable Features - NEC 10930 95 User Manual

Additional User Programmable Features

To program a feature, dial # and the feature's code. For example, to enable incoming Paging, dial # + V P Y, then SPEAKER
to hang up. Normally, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to extension 300 .
For more on the features, see the Telephone Feature Handbook .
Feature
Call Forwarding Clear All
Hotline Key Assignment
Off-Hook Signaling
Paging (Incoming)
Prime Line Assignment
Feature Key Assignment
Ringing Line Preference
Speed Dial
Time and Date
Intercom Voice Announce
(for Incoming Intercom Calls)
User Programmable Features Chart
Mnemonic Numeric
#CC + Y to clear (cancel) forwarding or N to exit without clearing +
#CC #22
SPEAKER to exit.
#HL + Press flashing Hotline key + Enter extension for new Hotline
#HL #45
partner + HOLD + Program another Hotline key or SPEAKER to exit.
#OHS #647 #OHS + Select mode (1 = Outside line, 2 = Calls from Hotline partner,
3 = Intercom) + Select option (see below) + SPEAKER to exit.
Outside line: 1 = Camp On tone, 2 = Off Hook Ringing, CLEAR = None.
Hotline partner: 1 = Camp On, 2 = Voice Over, CLEAR = None.
Intercom: 1 = Camp On, 2 = Voice Over, CLEAR = None.
#VP + Y to enable or N to disable + SPEAKER to exit.
#VP #87
#PLA + Press one of your flashing programmable keys, INTERCOM,
#PLA #752
or CLEAR for none + SPEAKER to exit.
#KP + Press key you want to program + HOLD + INTERCOM + Press
#KP #57
VOLUME to select key option + HOLD + (Enter any additional data +
HOLD – see the Telephone Feature Handbook) + SPEAKER twice to exit.
#RLP + Y to enable or N to disable +
#RLP #757
#SP + Dial bin number or press bin key + HOLD + Dial outside line (e.g.,
#SP #77
1), Line group (e.g., 90-98), or INTERCOM for Intercom feature + HOLD
+ Number to store + HOLD twice + Name + HOLD + SPEAKER to exit.
(System bins are 201-299. Personal bins are 701-720.)
#TD #83 #TD + Enter time in 24-hour clock using hours (2 digits), minutes (2
digits) and seconds (2 digits) + HOLD + Enter date using month (2
digits), day (2 digits) and year (4 digits) + HOLD +
#VA #82 #VA + V for voice announce or R for ring + SPEAKER to exit.
Operation
SPEAKER to exit.
SPEAKER to exit.
15