Selecting The Default Settings - Sony LMD-940W Operating Instructions Manual

Selecting the Default
Settings
When you turn on the unit for the first time after
purchasing it, select the area where you intend to use this
unit from among the options.
The default setting values for each area
5
4
3
3
1 NORTH AMERICA
ARGENTINA
2 LATIN AMERICA
PARAGUAY
PAL&PAL-N
AREA
URUGUAY
NTSC&PAL-M
OTHER AREA
AREA
3 AFRICA AUSTRALASIA
EUROPE MIDDLE-EAST
NTSC AREA
4 ASIA EXCEPT
JAPAN
PAL AREA
5 JAPAN
3
1
2
COLOR NTSC COLOR
TEMP SETUP SPACE
D65 7.5 SMPTE-C
D65 0 EBU
D65 0 EBU
D65 0 EBU
D65 7.5 SMPTE-C
D65 0 EBU
D65 7.5 SMPTE-C
D65 0 EBU
D93 0 EBU
SDI HDMI COMPOSITE F1 F2 F3
i
1
Press the 1 (standby) switch.
The unit is turned on and the SELECT SETTING
screen appears.
S E L E C T S E T T I N G
N O R T H _ A M E R I C A
L A T I N A M E R I C A
A F R I C A A U S T R A L A S I A E
A S I A E X C E P T J A P A N
J A P A N
2
Turn the menu selection control to select the area
where you intend to use the unit and press the menu
selection control or the ENTER button.
If you select either 1, 3 or 5
The confirmation screen is displayed. Confirm the
selected area. When the setting is wrong, press the
RETURN button to return to the previous screen.
S E L E C T T H I S A R E A ?
N O R T H A M E R I C A
[ E N T E R ] Y E S
[ R E T U R N ] NO
If you select either 2 or 4
One of the following screens appears. Turn the
menu selection control to narrow the area further
and then press the menu selection control or the
ENTER button.
The confirmation screen is displayed. Confirm the
selected area.
If the setting is wrong, press the RETURN button to
return to the previous screen.
F4 F5 F6 F7 ENTER RETURN MENU
1
ENTER RETURN MENU
1
2~3 1
North America
1
Latin America
2
3 Africa, Australia/New
Zealand, Europe,
Middle East, Russia
4 Asia Except Japan
5 Japan

Selecting the Default Settings

15