Comparisons With Similar Products; Specification Comparisons; Precautions In Sales Promotion; Handling Instructions - Hitachi W 4YD Technical Data And Service Manual

6. COMPARISONS WITH SIMILAR PRODUCTS

6-1. Specification Comparisons

Item
Screw size
Capacity
Screw length
Power input
No-load speed
Power input
No-load noise level
Moment of center of gravity
Load of feeder
Weight (without cord)
Overall length (listed on the catalog)
Bit shaft length (28L/41L)
Cord length
Standard accessories

7. PRECAUTIONS IN SALES PROMOTION

In the interest of promoting the safest and most efficient use of the Model W 4YD Automatic Screw Driver by all of
our customers, it is very important that at the time of sales the salesperson carefully ensures that the buyer
seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the
meaning of the precautions listed on the Caution Plate attached to each tool.

7-1. Handling Instructions

Although every effort is made in each step of design, manufacture and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric power tool cannot be completely eliminated.
Accordingly, general precautions and suggestions for the use of electric power tools, and specific precautions and
suggestions for the use of the electric screwdriver are listed in the Handling Instructions to enhance the safe and
efficient use of the tool by the customer. Salespersons must be thoroughly familiar with the contents of the
Handling Instructions to be able to offer appropriate guidance to the customer during sales promotion.

7-2. Caution Plate

The following basic safety precautions are listed on the Name Plate attached to the main body of each tool.
However, these precautions are not listed for European countries.
For Oceania
Maker/Model
Unit
mm
mm
W
min -1
W
dB
N m
•
N
kg
kg
mm
335 (13-3/16")/335 (13-3/16")
m
+ driver bit No. 2
Hook ass'y
Sheet
Rubber cover set
Case
Hitachi
W 4YD
4 (5/32")
25 - -- 41 (1" - -- 1-5/8")
470
4,700
450
81
1.7
34
1.7 (3.7 lbs.)
335 (13-3/16")
5 (196-7/8")
--- 6 ---
C
4 (5/32")
25 - -- 40 (1" - -- 1-9/16")
470
4,700
455
79
1.9
47
1.9 (4.2 lbs.)
364 (14-11/32")
336 (13-3/16")/348 (13-11/16")
2.5 (98-7/16")
+ driver bit No. 2
Hook ass'y
Case