Keep this manual at hand for quick reference at any time necessary. Be sure to read "Notes on Use" before handling this product. Notes on Use (Be Sure to Read) The following provides information required to use this product safely and properly. For details of names in this section, refer to "Names and Functions of Parts"...
Page 43
Symbols used in this manual and on warning labels ああ Attentions Indicates there is a risk of fire or Indicates the presence of electric fumes. shock hazards. Indicates there is a risk of personal Indicates a general notice or warning injury due to high temperature.
Page 44
~ Be sure to read ~ Safety Precautions ほ WARNING Do not use the product for services where human life may be at stake or high reliability is required. This product is not intended for use in medical, nuclear, aerospace, mass transit or other applications where human life may be at stake or high reliability is required, nor is it intended for use in controlling such applications.
Page 45
Do not use any unauthorized interface cable. Use only the interface cables specified by NEC. Locate a proper device and connector before connecting a cable. Using an unauthorized cable or connecting a cable to an improper destination may cause a short circuit, resulting in a fire.
Page 46
Cleaning and Handling WARNING Do not disassemble, repair, or alter the product. Never attempt to disassemble, repair, or alter the product on any occasion except as described in this document. Failure to follow this warning may cause not only malfunction of the product but also an electric shock or fire.
Guide de l'Utilisateur. Mesures de sécurité Suivez les instructions de ce guide pour un usage en toute sécurité du poste de travail NEC Express. Ce document décrit les parties dangereuses du poste de travail, les risques possibles, et comment s’y prendre pour les éviter.
Page 48
Symboles utilisés dans ce document et sur les étiquettes ああ de mise en garde Attention Ceci signale qu'il y a un risque Ceci signale la présence de risques de d’incendie ou de fumée. décharge électrique. Ceci signale la présence d'une surface ou Ceci signale un avis ou un avertissement d'un composant réchauffé.
Précautions de la sécurité ~Soyez sûr de lire~ ほ AVERTISSEMEMNT N'utilisez pas ce poste de travail pour des services pour lesquels une haute disponibilité critique peut affecter directement les vies humaines ou pour lesquels une fiabilité élevée est exigée. Ce poste de travail n'est pas prévu Ce poste de travail n'est pas prévu pour être utilisé...
Page 50
Utilisation de l'alimentation électrique et du câble d’alimentation AVERTISSEMENT Ne saisissez pas la prise d’alimentation avec une main mouillée. Ne déconnectez pas/ne connectez pas la prise avec des mains mouillées. Si vous ne respectez pas cette observation, une décharge électrique risque de se produire.
Page 51
à la suite d'un court-circuit. Utilisez seulement le câble d'interface spécifié. Utilisez seulement les câbles d'interface fournis par NEC et placez l’appareil et le connecteur appropriés avant de connecter le câble. L’utilisation d’un câble non autorisé ou le raccordement d’un câble dans un but incorrect risque de provoquer un court-circuit, ayant comme résultat...
Page 52
Nettoyage et opération avec les dispositifs internes AVERTISSEMENT Ne démontez pas, ne réparez pas ou ne modifiez pas le poste de travail. N'essayez jamais de démonter, réparer ou modifier le poste de travail dans un but autre que celui décrit dans ce document. Si vous n’observez pas cette instruction, vous risquez de provoquer une décharge électrique ou de causer un incendie aussi bien que des défauts de fonctionnement du poste de travail.
NEC Express5800 Series workstation. The Quadro K2200 is a graphics accelerator card that allows rapid graphics drawing by onboard graphics accelerator chip Quadro K2200. The Quadro K2200 can work on Microsoft Windows 7 and Microsoft Windows 8 and Microsoft Windows 8.1.
For the product of its warranty period expired, contact your sales agent or service representative. ・NEC assumes no liability for malfunction of the product resulted from using the third-party workstation, devices and interface cables not authorized by NEC. Information Service Information is provided also on the following web site: http://www.nec.com/...
Regulatory Notices FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 56
Contents Be sure to read "Notes on Use" before handling this product..........1 Safety Indications ..............................1 Safety Precautions ~ Be sure to read ~ ....................3 Mesures de sécurité .............................. 6 Précautions de la sécurité ~Soyez sûr de lire~ ..................8 Preface ..................................
Operating System The Quadro K2200 works on a computer on which Windows 7 / Windows 8 / Windows 8.1 runs normally. Monitor Use the monitor that satisfies resolution and refresh rate of this product. The resolution and refresh rate may differ depending on monitor type.
Follow the steps below to install them appropriately to your system. Even if Quadro K2200 is already installed in your system, you need to install the display driver. (1)If any graphics accelerator other than Quadro K2200 is installed, be sure to uninstall other display driver before installing Quadro K2200.
2. Installing Hardware 2.1 Precautions on handling the card ・ It is recommended to ask your sales representative to install this product in your workstation. Refer to the User's Guide of workstation when installing this product. ・ The electronic components used in this product may be damaged by electrostatic discharge. Take an appropriate anti-static measures (e.g., by grounding a part of your body) when handling this product.
Page 60
ATTENTION Débranchez le cordon du pouvoir. Si le poste de travail court, quittez toutes les applications, propulsez du poste de travail et appareils périphériques, puis débranchez le cordon du pouvoir de débouché du pouvoir. Faites bien attention à la surface chaude Juste après que le poste de travail ait été...
2.2 Installing the Card (1) After making sure that workstation and peripheral devices are turned off, unplug the power cord of the workstation. (2) Remove the top cover from the chassis according to the User's Guide of the workstation. (3) Remove the back panel cover (fixing screw or fixing jig) from the PCI-Express (x16) slot, and remove the back panel or PCI-Express card.
Page 62
(4) Insert the PCI-Express card edge connector of Quadro K2200 into PCI-Express x16 slot on the workstation so that the card can be connected firmly. Insert PCI-Express card edge connector into PCI-Express x16 slot on the workstation so that the card can be connected firmly.
Page 63
※If the DIMM slots are located near the PCI-Express x16 slot, make sure that the lock levers of DIMM are surely raised. ※If the PCI-Express x16 slot has locking lever, connect the card carefully not to damage the locking lever. DIMM locking lever PCI-Express x16 slot locking lever CAUTION...
Page 64
(7) Install the top cover of workstation you have removed in Step (2), and connect power cable of workstation. This completes hardware installation. ※If the beep sound is heard at power on, the Quadro K2200 card is not recognized. In this case, insert the Quadro K2200 card into PCI-EXPRESS again. 23...
Page 65
(3) Remove the top cover from workstation according to the User's Guide of workstation. (4) Remove the screw or fixing jig from rear bracket of Quadro K2200. (5) Remove the Quadro K2200 from PCI-Express slot while pushing the locking part (see Figure 1) toward the direction of arrow mark.
Quadro K2200. (2) Start the OS, and login the system with an account having an Administrator right. ※The PnP feature of OS detects Quadro K2200, and the "Found New Hardware Wizard" may start. Click the [Cancel] button to close the wizard.
Page 67
(6) Installing on Windows 7 / Windows 8 / Windows 8.1 ※When you click [Setup.exe] on Windows 7 / Windows 8 / Windows 8.1, a message to ask permission for user account control will be displayed. Click [Continue] or [Yes] to proceed with installation.
3.2 Uninstallation of Display Driver Take the steps below to uninstall the display driver. (1) Start the OS, and login the system with an account having an Administrator right. (2) On Windows 7, click the [Start] → [Control Panel] → [Uninstall a program] in order. On Windows 8, right-click on the start menu, select [All Programs] →...
Page 69
(3) Upon completion of uninstallation, you will be requested to restart the system. Click [Yes] to restart the system to reflect the results of uninstallation. This completes uninstallation of display driver. 28...
② Click the [Apply] On this menu, you can specify multiple displays and display area (resolution). If you select [Advanced settings] to open the Properties of [Quadro K2200], you can specify the refresh rate and Color Depth on the [Monitor] tab.
Page 71
4.1.2. Specifying Screen Resolution, Color Depth, and Refresh Rate ・Screen resolution Use the [Screen Resolution] window to change the resolution. Select a display you want to change its resolution, and select a resolution appropriately by moving the slider, and click the [Apply] button. A pop–up window shown above may appear depending on the selected resolution.
Page 72
・Color Depth Specify the color depth on the [Generic PnP monitor and NVIDIA Quadro K2200 Properties] that appears by clicking [Advanced settings] in [Screen resolution]. Click the [Monitor] tab, select a desired color from pull– down menu of [Color], and click [OK].
Page 73
4.1.3. NVIDIA Control Panel ・Opening [NVIDIA Control Panel] Right– click anywhere on desktop to open the menu. Click [NVIDIA Control Panel] to select it. Navigation tree pane Main task pane ・On the [NVIDIA Control Panel], use the main task pane and the navigation tree pane to setup drivers. ・The main task pane is used to setup the graphics driver.
Page 74
(Ⅰ)[3D Settings] The following items are contained in [3D Settings] category: ・ Adjust image settings with preview ・ Manage 3D settings ・ Set PhysX Configuration The details of each item are described below: [Adjust Image Settings with Preview] [Adjust Image Settings with Preview] You can preview the image as settings are changed.
Page 75
[Set PhysX configuration] ※Explanations are given here, however, this feature is not supported by NEC. [Set PhysX configuration] Set PhysX Configuration. (Ⅱ)[Display] The following items are contained in [Display] category: ・Change resolution ・Adjust desktop color settings ・Rotate display ・View HDCP status ・Set up digital audio...
Page 76
[Adjust Desktop Color Settings] [Adjust Desktop Color Settings] You can adjust desktop color settings including brightness and contrast for each display. Use the slider or a graph to set the display color. [Rotate Display] [Rotate Display] You can change the orientation of the desktop.
Page 77
[Set Up Digital Audio] [Set Up Digital Audio] You can select displays for audio playback. [Adjust Desktop Size and Position] [Adjust Desktop Size and Position] You can select a scaling mode. [Set Up Multiple Displays] [Set Up Multiple Displays] You can specify how you would like to use multiple displays.
Page 78
The following items are contained in [Stereoscopic 3D] category: ・Set up stereoscopic 3D ・View compatibility with games ※Explanations are given here, however, this feature is not supported by NEC. [Set Up Stereoscopic 3D] [Set Up Stereoscopic 3D] Stereoscopic 3D allows you to view 3D content with visible depth.
Page 79
The following items are contained in [Video] category: ・Adjust video color settings ・Adjust video image settings ※Explanations are given here, however, this feature is not supported by NEC. [Adjust video color settings] [Adjust video color settings] You can fine tune the color settings for video content on your display.
Page 80
(Ⅴ) [Workstation] The following items are contained in [Workstation] category: ・View system topology ・Set up Mosaic ・Manage GPU Utilization [View System Topology] [View System Topology] Shows displays graphics cards connected with the system. [Set Up Mosaic] [Set Up Mosaic] Mosaic allows you to use multiple displays as a single display.
Start the graphics accelerator in VGA mode, and change settings on Screen Properties, as shown below. On Windows 7 / Windows 8 / Windows 8.1, press the <F8> key once while the NEC logo is on the screen. On the Advanced Boot Option screen, select [Enable low resolution video (640×480)], confirm that your monitor satisfies the resolution and refresh rate displayed on Screen Properties.
[Apply] button. See Section 4.1.3 [Manage 3D Settings]. ・The Quadro K2200 monitors temperature on LSI chip. If the temperature rises beyond the specified threshold, the card automatically lowers the operating clock speed for safety, and moves to low power consumption mode.
5.7 Restrictions on Feature Standby/Hibernation of System ・While using a graphics application using OpenGL, the system cannot enter Standby/Hibernation mode. Change connection of monitor ・Connection of monitor cannot be changed while Mosaic is being used. If changed, the screen display may become abnormal. In this case, restore the original connection. ・Changing connection of monitor during power-on state is not supported.
6.2 Product Specification Product Specification Interface PCI-Express (x16 lane supported) Quadro K2200 (Made by nVIDIA) Graphics Accelerator Chip Video RAM Capacity 4GB (GDDR5-SDRAM) Compatibility with VGA Interface Provided (Embedded in Quadro K2200) Composition One PCI-Express card Operating Voltage +3.3V±5%、+12V±5% Maximum Power Consumption 67.7W...
Page 86
・Digital output Display modes in digital connection (DVI, Display-Port) Resolution Color Depth Refresh rate [Hz] 640 × 480 256,65536,1677 million colors 60,72,75 800 × 600 256,65536,1677 million colors 56,60,72,75 1024 × 768 256,65536,1677 million colors 60,70,75 1152 × 864 256,65536,1677 million colors 1280 ×...
6.4 Specification of Monitor Interface Connector Quadro K2200 has two Display– Port connectors and one integrated Digital Visual Interface (DVI-I) connector for image output. DVI-I connector Display-Port connector1 Display-Port connector2 [Identification of primary monitor in multiple displays mode] ・ If monitors are connected to DVI-I connector and Display-Port connector, the monitor connected to DVI-I connector is determined as primary monitor.
Page 88
Use the provided DVI to VGA connector to output an analog signal by this board. 6.4.3 DP to DVI Connector Connecting a separately priced DP to DVI connector to Display-Port connector on Quadro K2200 allows digital signal output by DVI–D.
Page 89
6.4.4 DVIto VGA Connector Connecting a DVI to VGA connector to DVI-I connector on Quadro K2200 allows VGA connector to output an analog signal. Monitor (Input) (Output) Quadro K2200 VGA (Dsub-15Pin) DVI-I connector connector VGA (D-sub15Pin) connector interface Pin layout of Dsub– 15Pin connector (analog) Pin No.
Page 90
NEC Express Workstation Quadro K2200 User's Guide September 2014, First Edition NEC Corporation c NEC Corporation 2014 The contents of this manual shall not be copied or altered without the prior written permission of NEC Corporation. 49...