Table of Contents
Advertisement
Technician setup Menu
3. On the Remote Sensor TsTbM-rrs--TW-a hold
the lighT button for 3 seconds to enter the tech
setup screens. The fi rst technician setup step is
ZOne.
TSTBM-RRS--TW-A
Remote Sensor
Wireless icon
Light button
Example Steps 3 and 5
4. Choose the zone that matches the
TsTbM3h2Cph6W-a that you currently want to
connect by pressing
You can only connect one
TSTBM-RRS--TW-A to each zone
FOR EXAMPLE: If you would like to connect
two TSTBM-RRS--TW-A to the
TSTBM3H2CPH6W-A , connect the fi rst
TSTBM-RRS--TW-A to ZONE 1. Connect the
second TSTBM-RRS--TW-A to ZONE 2.
5. While in the ZOne tech setup step on TsTbM-
rrs--TW-a, hold the light button down until the
wireless icon fl ashes, approximately 3 seconds.
Revised 02-13
.
Caution
Subject to change without prior notice
TsTbM-rrs--TW-a
6. The TsTbM3h2Cph6W-a should now show
the temperature of the remote sensor and the
remote name. Your TsTbM-rrs--TW-a has now
established a communication link with the
TsTbM3h2Cph6W-a.
TSTBM3H2CPH6W-A
Master Thermostat
Example Step 6
The TSTBM3H2CPH6W-A
now displays the name and
the ambient temperature of
the TSTBM-RRS--TW-A
TeChniCian seTup Menu
This remote sensor has a technician setup menu for
easy installer confi guration. To set up the remote
for your particular application:
1. Press and hold the lighT button for 3 seconds.
This 3 second delay is designed so that
homeowners do not accidentally access the
installer settings.
2. Confi gure the installer options as desired using
the following table.
3. Use the
+
key to move to the next tech setup
screen.
4. Use the
key to make adjustments to the
settings.
Press and release the light button when you
want to exit the tech setup screens.
6 720 220 377
7
Advertisement
Table of Contents
