Technician Setup Menu - Bosch TSTBM3H2CPH6W-A Installation Manual

14 TSTBM3H2CPH6W-A
Step 2.
Light key
DO NOT hold the light button on the
TSTBM3H2CPH6W-A for more than 10
seconds after Step 2 above has been
completed.
Holding the light button down will break the
communication link and the base module
button will need to be pressed again to
reestablish communication.
6 720 220 376

teCHniCiAn SetuP Menu

This thermostat has a technician setup menu for easy
installer configuration. To set up the thermostat for
your particular application:
1. Press MENU button
2. Press and hold TECHNICIAN SETUP button for 3
seconds. This 3 second delay is designed so that
homeowners do not accidentally access the
installer settings.
3. Configure the installer options as desired using
the table below. Use the [-] or [+] keys to change
settings and the NEXT STEP or PREV STEP key to
move from one option to another.
Caution
Subject to change without prior notice
technician Setup Menu
Only press DONE key when you want to exit
the Technician Setup options.
Revised 02-13