Brake Light Switch Adjustment; Cable Inspection And Lubrication; Pedal Lubrication - Yamaha YX10ZPSG Owner's Manual

EBU32550

Brake light switch adjustment

The brake light switch, which is activated by
the brake pedal, is properly adjusted when
the brake light comes on just before braking
takes effect. If necessary, adjust the brake
light switch as follows.
Turn the adjusting nut while holding the brake
light switch in place. To make the brake light
come on earlier, turn the adjusting nut in di-
rection (a). To make the brake light come on
later, turn the adjusting nut in direction (b).
8
(b)
1. Brake light switch
2. Adjusting nut
(a)
1
2
EBU32561

Cable inspection and lubrication

EWB03380
WARNING
Damaged cables could restrict operation,
which may cause an accident or injury. In-
spect control cables frequently and re-
place damaged cables. Corrosion can
result when the outer covering of control
cables becomes damaged. Cables can
also become frayed or kinked.
Lubricate the cable ends. If the cables do not
operate smoothly, ask a Yamaha dealer to re-
place them.
Recommended lubricant:
Yamalube LubezAll
EBU35200

Pedal lubrication

The pivoting parts of the brake, clutch, and
accelerator pedals should be lubricated peri-
odically to prevent rust and ensure smooth
operation.
8-49