Computer Setup-Security - HP EliteDesk 705 G2 Maintenance And Service Manual

Computer Setup—Security
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 5-2 Computer Setup—Security
Option
Set up BIOS
Administrator Password
Change BIOS
Administrator Password
(This selection is active
only if a BIOS
administrator password is
set.)
Password Policy
Security Configuration
TPM Embedded Security
56 Chapter 5 Computer Setup (F10) Utility
Description
Lets you set and enable a BIOS administrator password, which includes the following privileges:
● Manage other BIOS users
● Full access to BIOS policy and settings
● Control BIOS access of other users by setting security level
● Unlock the computer when other BIOS users fail the preboot authentication.
NOTE: Creating a BIOS user disables the Fast Boot option.
NOTE: If the password is set, it is required to change Computer Setup options, flash the ROM, and make
changes to certain plug and play settings under Windows.
Lets you change the BIOS administrator password.
You must know the current password to be able to change it.
Let you set the guidelines for a valid password. Options include:
● Password minimum length
● Requires at least one symbol
● Requires at least one number
● Requires at least one upper case character
● Requires at least one lower case character
Allow spaces
●
Clear Password Jumper
Select 'Honor' to engage or 'Ignore' to disengage the password jumper. Default is 'Honor'.
Lets you activate HP SureStart.
Verify Boot Block on ever Boot
Select to enable HP SureStart.
BIOS Data Recovery Policy
Select 'Automatic' or 'Manual' to determine data recovery process.
TPM Device
Lets you set the Trusted Platform Module as available or hidden.
TPM State
Select to enable the TPM.
TPM Clear
Select to reset the TPM to an unowned state. After the TPM is cleared, it is also turned off. To temporarily
suspend TPM operations, turn the TPM off instead of clearing it.