Kenwood DV-303 Service Manual page 9

QQ
3 7 63 1515 0
2-10 Disassembling the Nut Unit
1. Remove the screw.
Notes
• The nut unit is not part of the optical pickup.
Before replacing the optical pickup, remove the nut unit
for use with the new optical pickup.
• After installation, use screw lock to lock the screw in posi-
tion.
• When reassembling, use screw lock to lock the screw in
position after attaching it.
TE
L 13942296513
2-11 Disassembling the Sub-Shaft Preload Spring
1. Remove the screw.
Notes
• Handle the sub-shaft preload spring carefully because the
shape of the tip is easily deformed.
• The sub-shaft preload spring is not part of the optical
pickup. Before replacing the optical pickup, remove the
sub-sahft preload spring for use with the new optical
pickup.
• After installation, use screw lock to lock the screw in posi-
tion.
www
.
DISASSEMBLY FOR REPAIR
x ao u163
y
i
DV-303/DVF-5020/K5020
2 9
8
2-12 Assembling the Optical Pickup
1. Install the optical pickup.
Note
Take care not ot attach the tilt spring and guide shaft in
the wrong order.
Q Q
3 6 7 1 3 1 5
2. Fit the protruding part of the pickup FPC into the convex-
part of the FPC holder to install it.
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9
9