1 Colour Mode
Colour and monochrome originals can be copied in one specified colour.
The colour can be selected from the basic colours (red, green, blue, yellow, magenta, and cyan) and
the registered colours.
When the 1 Colour mode is selected, the Original Type setting selection is not available.
1
Select "1 Colour".
To display this screen, refer to steps 1 to 3 of
Selecting the Colour Mode (see page 12).
2
Select "Change Colour".
The colour and the specified name are
displayed.
Ex: Copying a full colour original in cyan.
Ex: Copying a monochrome original in cyan.
3
Select a colour from the basic colours
or custom colours, and then select
"OK".
When selecting a colour from the basic
colours
1
2
17