Panasonic DP-C406 Operating Instructions Manual page 69

5
Select "XY" to set the same value for X
and Y, or "X" or "Y" to set a different
value for X and Y.
XY Select to set the same erasing
width for all sides.
X Select to set the erasing width
for the right and left sides.
Y Select to set the erasing width
for the top and bottom sides.
6
Enter the erasing width with
, or the Keypad, and then select
"OK".
The erasing width can be set in 1 mm
increments from 5 mm to 99 mm.
7
Enter the desired number of copies.
8
Press the Start key.
When copying from the Platen Glass, place
the next original, and follow the instructions
described on the Touch Panel Display. (The
instructions are displayed only when the
Sort mode other than "Non Sort" is
selected.)
After finishing copying, press the Reset key to
return to the initial screen of the current active
mode.
and
2 1
69