BRAKES
REAR CALIPER SERVICE
Caliper Exploded View
47 in-lbs
(5.3 Nm)
I
K
A. Brake Pad
B. Mount Bracket
C. Piston
D. Caliper Assy.
E. Square Ring (thick)
F. Square Ring (thin)
G. Boot, Pin Bushing
H. Boot, Pin Seal
I. Bleeder Screw
K. Set Screw
Caliper Removal
1. Elevate and safely support the rear of the vehicle.
CAUTION
Use care when supporting vehicle so that it does not
tip or fall. Severe injury may occur.
2. Remove the (4) wheel nuts and rear wheel.
3. Clean caliper area before removal.
4. Place a container below the caliper to catch the brake
fluid. Remove brake line from caliper.
9.20
H
E
F
Remove
Brake Line
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
D
G
C
B
5. Loosen the brake pad adjustment set screw to allow
brake pad removal after the caliper is removed.
6. Remove the two caliper mounting bolts and remove
the caliper.
Apply Polaris DOT 4 Brake
Fluid to Component
Apply Silicone Grease
A
Remove