Specifications; Projector Specifications; Optical Specifications - NEC NP4100 User Manual

8. Specifications

Projector Specifications

This section provides technical information about the projector's performance.

Optical Specifications

Optical
Projection System
Resolution*1
Lens
Lamp
Light Output*2 *3
Contrast Ratio*3
(full white: full black)
Image Size (Diagonal)
Lens Shift
*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) when the [Preset] mode is set to [High-Bright]. If any
other mode is selected as the [Preset] mode, the light output value may drop slight.
*3 Compliance with ISO21118-2005.
NP4100
TM
Single DLP chip
(0.7 inches, aspect 4: 3)
1024 x 768 pixels
Motorized zoom, focus, and lens shift
NP06FL: Power focus, throw ratio 0.77:1, F2.0, f=11.4 mm
NP07ZL: Power zoom and focus, throw ratio 1.33 – 1.79:1,
F1.8-2.3, f=19.3-25.8 mm
NP08ZL: Power zoom and focus, throw ratio 1.78 – 2.35:1,
F1.7-1.9, f=26-34 mm
NP09ZL: Power zoom and focus, throw ratio 2.22 – 4.43:1,
F2.1-2.9, f=32-63 mm
NP10ZL: Power zoom and focus, throw ratio 4.43 – 8.3:1, F2.2-
3.1, f=63.5-117.4 mm
280 W AC (230 W in Eco mode), Dual lamp system
6200 (NP4100) / 5500 (NP4100W) on NP08ZL,
Dual lamp (approx. 85% in Eco mode)
1000:1, 2100:1 with DynamicBlack
50 inches – 200 inches / 1.27m – 5.08m (NP06FL)
40 inches – 500 inches / 1.02m – 12.7m
(NP07ZL, NP08ZL, NP09ZL, NP10ZL)
Vertical + 0.5V, Horizontal +/- 0.1H
(NP07ZL, NP08ZL, NP09ZL, NP10ZL)
124
NP4100W
TM
Single DLP chip
(0.65 inches, aspect 16:10)
1280 x 800 pixels