NEC NP4100 User Manual page 153

8. Specifications
F
UNCTION
Picture Panel
Source Select Panel
Projector Status Panel
Note:
The functions that can be controlled will vary depending on the signal being input
to the projector (see
S
ETTING
Brightness ▲▼ – Increases or decreases the
brightness adjustment value
Contrast ▲▼ – Increases or decreases the contrast
adjustment value
Color ▲▼ – Increases or decreases the color
adjustment value
Hue ▲▼ – Increases or decreases the hue
adjustment value
Sharpness ▲▼ – Increases or decreases the
sharpness adjustment value
Computer1 – Switches to the COMPUTER 1 IN
connector
Computer2 – Switches to the COMPUTER 2 IN
connector
Computer3 – Switches to the COMPUTER 3 IN
connector
Component – Switches to the COMPONENT IN
connectors
Video – Switches to the VIDEO IN connector
S-Video – Switches to the S-VIDEO IN connector
Refresh – Updates the panel with the latest
information available
Lamp 1 Life Remaining – Displays the remaining
life of Lamp1 as a percentage
Lamp 1 Hours Used – Displays the number of
hours Lamp1 has been used
Lamp 2 Life Remaining – Displays the remaining
life of Lamp2 as a percentage
Lamp 2 Hours Used – Displays the number of
hours Lamp2 has been used
Filter Hours Used – Displays the number of hours
Filter has been used.
Error Status – Displays the status of errors
occurring within the projector
Selecting a Source on page
Controls the video adjustments of the
projector
This switches the input connector of the
projector
This displays the status of selected
projector functions
40 for more information).
138
D
ESCRIPTION