Removing Sheets
9
Remove the sheet, keeping the front edge level as
you pull it out.
Important
10
Press the OK button.
Removing Sheets
Removing Sheets
Remove sheets from the printer as follows.
Removing sheets from the top paper feed slot
•
Removing heavyweight sheets from the front paper feed slot
•
•
The operations for a printer with a Spectrophotometer Unit (option) are the same as for a printer with no Spectrophotome-
ter Unit (option).
Note
Removing sheets from the top paper feed slot
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab (
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select Yes, and then press the OK button.
The paper is ejected from the front of the printer.
504
Important
•
If POP Board is accidentally removed at an angle, it may scratch the printed surface.
).
•
If the Tab Selection screen is not displayed, press the Menu button.
•
If the trailing edge of a sheet is not ejected, pull the sheet out, keeping the front edge level. Accidentally re-
moving the sheet at an angle may scratch the printed surface.
P.504
➔
P.505
➔
iPF6400S
User's Guide