Dell Inspiron 4000 Service Manual page 25

Replacing the Palm Rests
1. Save and close any open files, exit any open programs, and shut down the computer.
2. If the computer is connected (docked) to an advanced port replicator (APR), undock it.
3. Keep the display open and tilt the computer back so that you can access the bottom of the computer.
4. Slide and hold the latch release on the left side, and remove any device installed in the modular bay.
5. Slide and hold the latch release on the right side, and remove any battery installed in the battery bay.
6. Locate the orange palm rest removal buttons. Firmly press the buttons with the eraser end of a pencil (or a dull utensil smaller than your finger) to
release the palm rests.
7. Remove the palm rests.
8. To replace the palm rests, insert the tabs on the inside edge of the palm rest into the slots on the computer. Then press along the outside edges of the
palm rest until it snaps into place.
Repeat the process on each side.