Technical Data; Drill Speed And Drill Sizes - Husqvarna DM 220 Operator's Manual

Electric motor
Rated voltage, V
Rated output, W
Rated current, A
220-240
100-120 V
Weight, kg
Volume gear box oil, dl
Gear box oil, type
Diameter drill bit, mm
Max. diameter of the drill bit, with stand
Max. diameter for the drill bit, handheld
Spindle thread
Water connector
Water pressure - max, bar
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed dB(A)
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
Vibration levels, a (see note 3)
hv
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Noise pressure level according to EN 60745-2-1. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 60745-2-1. Reported data for vibration level has a typical statistical dispersion (standard
2
deviation) of 1 m/s .

Drill speed and drill sizes

Drill bit speed
Gear
with load, rpm without load, rpm
1 580
2 1400
3 2900
16 –
English

TECHNICAL DATA

Drill bit load Recommended
drill bit size, mm
730 Not recommended Not recommended
1700 40-80
3600 0-40
DM 220
Single-phase
220-240/100-120
1850
8 A
13 A
7
0,25
AP GL-5 SAE 75W-90 or
similar
150 mm (5,9")
80 mm (3.14")
G 1/2"
G 1/4"
8
107
108
93
2,8
2,6
) in conformity with EN 60745-2-1.
WA
Handheld drilling
Recommended
drill bit size, inch
2-4
0-2
G 1 1/4"
Stand drilling
Recommended Recommended
drill bit size, mm drill bit size, inch
100-150
40-80
0-40
4-6
2-4
0-2