Description Of The Functions - Miele DA 2906 Operating And Installation Instructions

Description of the functions

Depending on the model of the
rangehood, the following options are
available:
Air extraction mode
The air is drawn into the rangehood. It
is then cleaned by the edge extraction
panels and the grease filters and
directed outside.
Non-return flap
The non-return flap is designed to
prevent the exchange of room and
outside air taking place.
The flap is closed when the rangehood
is switched off.
When the rangehood is switched on,
the non-return flap opens for the
cooking vapours to be blown directly
outside.
If the on-site ventilation system does
not have a non-return flap, the non-
return flap supplied must be fitted.
14
Recirculation mode
(DUU 2900 conversion kit required)
The air is drawn in through the edge
extraction panels and then cleaned by
the grease filters. It is then directed into
the recirculation box where it is also
cleaned by the charcoal filters. The
cleaned air is then recirculated back
into the kitchen.
Operation with an external
motor
(...EXT model rangehoods)
Rangehoods set up for operation with
an external motor have to be connected
to a Miele external motor located in a
suitable position outside the room in
which the rangehood is installed. The
external motor is linked to the
rangehood via a connection cable and
then operated using Con@ctivity 2.0 or
via the controls on the rangehood or
the remote control.