Panels And Grease Filters For Edge Extraction - Miele DA 2906 Operating And Installation Instructions

Cleaning and care
Important for appliances with
stainless steel surfaces
(This infomation does not apply to the
controls)
 Stainless steel surfaces can be
cleaned with a proprietary non-
abrasive cleaning agent designed
specifically for use on stainless steel.
 To help prevent re-soiling, a
proprietary conditioning agent for
stainless steel (Original Miele Care
product for stainless steel) can also
be used. Follow the manufacturer's
instructions on the packaging.
Apply sparingly with a soft cloth
following the instructions on the
packaging.
Important for the controls
Do not leave soiling on the controls
for any length of time.
Otherwise they may suffer
discolouration or damage.
Remove any soiling immediately.
 Observe the general notes on
cleaning earlier in this section.
Do not use stainless steel cleaning
agents on the controls.
28
Panels and grease filters for
edge extraction
The edge extraction panels and the re-
usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
rangehood.

An oversaturated filter is a fire
hazard.
When to clean the grease filters
The grease filters and panels should be
cleaned regularly (at least every 3-4
weeks) to avoid a build-up of grease.
Clean them immediately if the grease
filter operating hours control  lights
up.
 You can set the operating hours
counter to suit the type of cooking
you do (see "Operation").