Declaration Of Conformity - Bosch GKS Professional 65 Original Instructions Manual

OBJ_BUCH-359-001.book Page 23 Thursday, February 7, 2008 8:28 AM
20 Saw blade*
21 Mounting flange
22 Saw spindle
23 Fastening screw for extraction adapter*
24 Extraction adapter*
25 Clamping lever for cutting-depth preselec-
tion
26 Cutting-depth scale
27 Wing bolt for bevel-angle preselection
28 Set of screw clamps*
29 Guide rail*
30 Connection piece*
31 Vacuum hose*
32 Guide-rail adapter*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 95 dB(A);
Sound power level 106 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
tainty K =1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
Bosch Power Tools
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
11.12.2007, Robert Bosch GmbH, Power Tools Division
2
=3.0 m/s , Uncer-
D-70745 Leinfelden-Echterdingen
h
English | 23
Dr. Eckerhard Strötgen
Head of Product
Certification
1 609 929 K95 | (7.2.08)