Using The Timer - Husqvarna 105 Operator's Manual

4.2 Using the timer

The lawn should not be cut too often to obtain the best
mowing result. Use the timer function (see 6.3 Timer
on page 46.) to avoid a downtrodden lawn. When
setting the timer, calculate that the robotic lawnmower
mows about 43 m per hour and day.
2
Example
If the working area is 360 m
lawnmower must operate for about 9 hours per
day. The times are approximate and depend for
instance on grass quality, blade sharpness and
battery age.
IMPORTANT INFORMATION
Use the timer to avoid mowing when there
are usually children, pets and anything else
that could be damaged by the rotating blades
on the lawn.
The factory setting for the timer is 07:00-23:00 and it
allows mowing every day of the week. This setting is
suitable for a working area of about 600 m
If the size of the working area allows it, the quality of
the grass can be further improved if it is cut every
other day instead of a few hours every day. In
addition, the grass benefits from resting completely
during at least a three-day period once a month.
Standby
The robotic lawnmower has an inbuilt standby
period of about 10 hours a day. The standby period
provides a good opportunity, for example, to water or
play games on the lawn.
Example 1
Work period 1: 07:00 - 23:00
Work days: All days
The factory setting ensures that the robotic
lawnmower begins cutting the lawn at 07.00.
The mower is parked in the charging station from
21.00 and rests until it starts cutting again at
07.00
If the timer setting is divided into two work periods,
the standby period can be divided into a number of
periods. The total standby time must however be at
least 10 hours).
38 - English
4. USE
the robotic
2
.
2
Operation A = Max 14 h
Charging/Standby B = Min 10 h
3012-108